C 350 (203.056) V6-3.5L (272.960) (2006)
DANGER:
-
Risk of death. Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by
the vehicle manufacturer.
-
Risk of poisoning from swallowing brake fluid. Risk of injury from brake fluid coming into contact with skin and eyes.
-
Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling
brake fluid.
1
Remove cover below instrument panel (on left)
2
Remove sound absorber (7)
3
Remove stop lamp switch
4
Remove cover (6).
5
Suction off brake fluid from expansion reservoir
NOTE: Suction off brake fluid as far as the connection of the connector hose (8).
6
Pull the connector hose (8) off the expansion reservoir
7
Detach lower engine compartment paneling
NOTE: Only remove the rear section.
8
Remove bottom sections of noise encapsulation
NOTE: Only remove the rear section.
9
Open bleed screw on central clutch operator
NOTE: Collect brake fluid in a suitable container. Suction off brake fluid out of the line with the help of an assistant.
10
Pull out retaining clamp (9) at the connecting pipe of the master cylinder