mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AN82.25-P-0001-08CW Carry Out Initial Startup of Rental Vehicle Functions|Page 13862 > < AN82.25-P-0001-08CW Carry Out Initial Startup of Rental Vehicle Functions|Page 13860
Page 5
background image

3

Open cable duct covers (25) of left front footwell cable duct.

4

Open cable duct covers (26) of right front footwell cable duct.

Throughout the remainder of the work procedure make sure that all electrical lines and branch-off lines for the rental vehicle wiring harness (1) are
routed without any kinks and without chafing. The electrical lines and branch-off lines must be routed without making contact with any other
movable parts. Otherwise electrical lines may be damaged.

Installation of lines in luggage compartment

5

Route branch-off line (1c) of rental vehicle wiring harness (1) in the carrier plate (11), as shown, to the special-purpose vehicle multifunction
control unit (N26/9) and join the two connectors for the branch-off line (1c) on the special-purpose vehicle multifunction control unit (N26/9).

6

Route branch-off line (1d) under the positive line (27) of the on-board electrical system battery (arrows).

AN82.25-P-0001-08CW Carry Out Initial Startup of Rental Vehicle Functions|Page 13862 > < AN82.25-P-0001-08CW Carry Out Initial Startup of Rental Vehicle Functions|Page 13860