mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Campaign - Replacement Of Tele Aid Control Module|Page 14087 > < Campaign - Replacement Of Tele Aid Control Module|Page 14085
Page 3
background image

1. Print-out control module version by navigating through the following screen menus: Main Groups/Control Units/Information and
communication/Audio, video, navigation and telematics/Tele Aid-Emergency call, Stolen vehicle tracking, MB info, Roadside Assistance, Remote door
unlocking, Remote door locking/Control unit version Control unit TELE AID.

2. Transfer the settings of the Tele Aid control module to Star Diagnosis by navigating through the following screen menus: Initial Start-up (follow
on-screen instructions).

3. Proceed to Subject B: Replace Tele Aid Control Module.

B. Replace Tele Aid Control Module

1. Models 211/219/216/221:

^

Remove trunk floor panel and rear cover panel covering Tele Aid control module.

^

Find location of Tele Aid control module (N123/4, Figures 1-2).

^

Replace Tele Aid control Module.

^

Proceed to Subject E: Initialize and Register Tele Aid Control Module.

2. Model 171: proceed to Subject C.

3. Model 230: proceed to Subject D.

4. Refer to WIS for models:

^

164/164.8: AR82.95-P-0005GZ

^

204: AR82.95-P-0005CW

^

251: AR82.95-P-0005RT

Note: (regarding model 251 WIS instructions):

Remove rear bolts securing front seat to allow easier access to Tele Aid control module.

Note (regarding the 4 WIS instructions listed above):

After installing Tele Aid control module proceed to Subject E: Initialize and Register Tele Aid Control Module.

5. Model 204.9:

^

Remove cargo compartment components, refer to WIS: AR68.80-P-5800CY.

Campaign - Replacement Of Tele Aid Control Module|Page 14087 > < Campaign - Replacement Of Tele Aid Control Module|Page 14085