C 350 (204.056) V6-3.5L (272.961) (2008)
/v6-3.5l_(272.961)/Page-3355001.png)
Parking Lamp: Description and Operation
GF82.10-P-3060CW Standing/Parking Lights Actuation, Function
Standing lamp actuation
Function requirements
^
Circuit 30
^
Exterior lights switch (S1) in standing lights position
Standing lamp actuation function sequence
The position of the exterior lights switch is read in by the front SAM control unit with fuse and relay module (N10/1) via instrument panel LIN. The
front SAM control unit forwards the switch-on request to the rear SAM control unit with fuse and relay module (N10/2) and to the trailer recognition
control unit (N28/1) (with code (550) Trailer hitch) via interior CAN.
The front SAM control unit actuates the following components:
^
Left front standing light and parking light (E1e3) and right front standing light and parking light (E2e3)
^
Left front standing light 2 (E1e12) and right front standing light 2 (E2e12)
^
Front left side-marker lamp (E6/1) and front right side-marker lamp (E6/2) (United States Of America and Canada only)
The rear SAM control unit actuates the following components:
^
Left brake light and taillight and parking light (E3e9) and right brake light and taillight and parking light (E4e9) (pulsed at 5 W)
^
Inner left brake light and taillight (E3e10) and inner right brake light and taillight (E4e10) (in each case pulsed at 5 W)
^
Left license plate lamp (E19/1) and right license plate lamp (E19/2)
^
Left rear side-marker lamp (E6/3) in the left rear lamp unit (E3) and right rear side-marker lamp (E6/4) in the right rear lamp unit (E4)
The trailer recognition control unit actuates the following components via the trailer socket (X58) (with code (550) Trailer hitch):
^
Taillight of trailer
^
Trailer license plate lamp
Feedback
The front SAM control unit actuates the standing lights indicator lamp (S1e3) in the exterior lights switch via instrument panel LIN.
Parking lamp actuation
Function requirements
^
Circuit 30
^
Circuit 15 Off
^
Exterior lights switch in right or left parking lights position
Parking lights actuation function sequence
The position of the exterior lights switch is read in by the front SAM control unit via instrument panel LIN.
The front SAM control unit forwards the switch-on request to the rear SAM control unit and to the trailer recognition control unit via interior CAN.
The front SAM control unit actuates the following components:
^
Left front and right front standing lights and parking lights
^
Left front and right front standing lights 2 (with United States Of America and Canada)
The rear SAM control unit actuates the following components:
^
Left stop lamp and taillamp and parking lamp
^
Right stop lamp and taillamp and parking lamp
The trailer recognition control unit actuates the following components via the trailer socket:
^
Taillight of trailer
