C 350 (204.056) V6-3.5L (272.961) (2008)
/v6-3.5l_(272.961)/Page-3401001.png)
Tail Lamp: Technical Service Bulletins
Body/Frame - Tail Lamp Cutout Tool Information
Date: May 5, 2009
Order No.: P-B-64.00/02
Supersedes:
Group: 64
SUBJECT:
MY-All, Model 203, 204, 209, 211
Special Tool for Creating Mounting Holes for Tail Lamp Cutout
Fit problems may occur when replacing the rear fender or tail lamp cutout. Adapt all mounting holes with the special embossing tool below.
Special Tools
