C 350 (204.056) V6-3.5L (272.961) (2008)
5. Remove excess insulation material from C-pillar trim (Figure 4).
6. Apply soundproofing to seat belt retractor (Figure 5).
7. Install C-pillar trim on left/right C-pillar. Refer to WIS document AR68.30-P-4490CW.
8. Check operation of the belt retractor. Belt must not rub against soundproofing when being retracted / rolled out.
Parts Information
NOTE: The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated
on October 24, 2008. Please refer to Netstar -> Star TekInfo -> Star Time for the most current labor time allowance.
In Case of Warranty
Operation: Interior trim panel on c-pillar-specify location, replace (68-1110)
Install soundproofing for rear seatbelt (68-0000)