mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Brake Fluid Level Sensor/Switch > < GF42.45-P-4810CW Yaw Rate, Lateral and Longitudinal Acceleration Sensor, Component Description
Page 1
background image

Acceleration/Deceleration Sensor: Description and Operation
GF91.60-P-4065CW Frontal Acceleration Sensor, Component Description

GF91.60-P-4065CW Frontal Acceleration Sensor, Component Description

Component Identification

Location

The frontal acceleration sensors are located to the left and right on the front module.

Task

The frontal acceleration sensors determine the acceleration value of the vehicle front for the left and right side of the vehicle. The supplemental restraint
system control unit (N2/10) uses these values to decide, whether to trigger the emergency tensioning retractor or airbag units.

The frontal acceleration sensors carry out a self-test. If the self-test fails 4 times, a defect is signaled for the corresponding frontal acceleration sensor.
Upon request of the supplemental restraint system control unit, the measuring range and the sensitivity of the frontal acceleration sensors are transmitted,
and it is checked whether they match the programmed equipment

The production data can be output via STAR DIAGNOSIS.

Brake Fluid Level Sensor/Switch > < GF42.45-P-4810CW Yaw Rate, Lateral and Longitudinal Acceleration Sensor, Component Description