C 350 (204.056) V6-3.5L (272.961) (2008)
5
Remove measuring sleeve socket (020e) from adapter, insert in transmission bore and fix. Do so by turning lower threaded stud (020f) to left and
tightening.
Shown on model 203, 209
Component Identification
6
Screw measuring sleeve adapter (020g) on to measuring sleeve socket (020e) and tighten all the way to transmission by hand. Ensure that the
measuring sleeve adapter (020g) contacts the surface of the transmission exactly.
Shown on model 203, 209
Component Identification
7
Mount sensor mount (020c) with the two knurled bolts centrally on the sensor (020a).
Component Identification
8
Fit sensor mount (020c) with sensor (020a) to measuring sleeve adapter (020g) by turning slightly to left/right (magnetic).
The spiral cable (020b) of the sensor (020a) must point in the direction of travel for each measurement, otherwise the measurement will be
incorrect.
Shown on model 203, 209