C 350 (204.056) V6-3.5L (272.961) (2008)
/v6-3.5l_(272.961)/Page-1722002.png)
Component Identification
3
Position the extraction and insertion tool 01 on the rear axle shaft flange (2), in the process screwing the spindle (03) onto the insertion tool (04).
4
Attach extraction and insertion tool (01) to rear axle shaft flange (2) using three wheel bolts.
5
Pull in the rear axle shaft flange (2) up to the stop in the angular contact ball bearing (3), to do this turn the nut (02) and counterhold the spindle
(03).
