mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AR67.10-P-1000-11SX Cut Out Windows With Roll Out|Page 17295 > < AR67.10-P-1000-11SX Cut Out Windows With Roll Out|Page 17293
Page 8
background image

Repair Materials

AH67.10-P-1000-01P Notes on Removal/Installation of Windshield

AH67.10-P-1000-01P Notes On Removal/Installation Of Windshield

^

Allow primer to air dry for 10 min. to avoid negative effects to the adhesive action of the glue.

^

The crank window in the driver door must be opened during the curing time to prevent the windshield from being pressed out by the air when the
doors are closed.

^

Install windshield on body flange within 10 minutes before adhesive force of glue starts to decrease.

^

Drive-away time for 2-component repair kit is 1 h.

^

Drive-away time for 1-component repair kit is 2 h.

^

The gluing area on the body flange must be absolutely free of dust and grease to prevent a decrease in the gluing force when installing window.

AR67.10-P-1000-03CW Prepare Window For Installation

AR67.10-P-1000-03CW Prepare Window For Installation

Repair Materials

The gluing area on the window must be absolutely free of dust and grease to prevent paint adhesion problem of the adhesive material when glazing.

1.

Check window for scratches and damage, replace if necessary.

2.1. Cut off residual adhesive material of window with scraper down to a height of approx. 2 mm. Remove adhesive material residues.

When reinstalling removed window.

2.2. Clean gluing area on window using cleaner from repair kit and rub dry with rag.

When installing a new window.
Observe processing instructions for primer to prevent adhesion problems with the adhesive material when installing the window.

3.1. Repair damaged primer layer on window with primer included in repair kit.

When reinstalling removed window.

3.2. Coat gluing area on window with primer included in repair kit (with max. 20 mm).

When installing a new window.
Windshields are generally delivered with a viewing window on the bottom left. If the viewing window is not required, coat this area on the inside
of the window with primer.

AR67.10-P-1000-04CW Align Windshield In Body Opening

AR67.10-P-1000-04CW Align Windshield In Body Opening

Test And Adjustment Values For Windshield

AR67.10-P-1000-11SX Cut Out Windows With Roll Out|Page 17295 > < AR67.10-P-1000-11SX Cut Out Windows With Roll Out|Page 17293