C 350 4MATIC (203.087) V6-3.5L (272.970) (2007)
Shifter M/T: Removal and Replacement
AR26.60-P-0600E Remove/Install Floor Selector
AR26.60-P-0600E Remove/Install Floor Selector
- with CODE (424) Sequentronic (SEQ) manual transmission
Remove, Install
DANGER:
-
Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to
skin and eyes from battery acid or when handling damaged lead-acid batteries
-
No fire, sparks, naked flames or smoking. Wear protective gloves, acid-resistant clothing and safety glasses. Pour battery electrolyte only into
suitable and appropriately marked containers.
1
Disconnect ground cable of battery
NOTE: Since the CAN is still active for 15 min.
2
Remove cover on gearshift lever (1)
3
Remove center console (3)
4
Remove ashtray housing at front of center console
5
Remove shift lever handle (2)
6
Pull out plug (4)
7
Remove floor shift (5)
8
Install in the reverse order
AR26.60-P-0600P Remove/Install Floor Selector
AR26.60-P-0600P Remove/install floor selector
-
with TRANSMISSION 716.6