mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Automatic Locking Function|Page 10571 > < Pump, Pneumatic System|Locations|Page 10568
Page 1
background image

Pump: Description and Operation
Automatic Locking Function

After reaching a speed of 3-5 km/h forward or backward, the doors and trunk lid are locked automatically. The tank flap remains unlocked. If the vehicle
is unlocked with the interior central locking switch following the automatic locking operation, this state is maintained until a door is opened or the
ignition is switched off. Then the vehicle is locked automatically again upon reaching the set speed. The logic circuitry for this function is integrated into
the pneumatic system equipment (PSE).

This function can be deactivated or activated as follows:

-

with HHT

-

with interior ZL switch with ignition switched on by pressing for longer than 5 s in the following direction:

Lock:

function switched on

Unlock: function switched off

Automatic Locking Function|Page 10571 > < Pump, Pneumatic System|Locations|Page 10568