C 43 AMG (202.033) V8-4.3L (113.944) (1998)
^
BAS solenoid valve (A7/7y1)
^
BAS diaphragm travel sensor (A7/7b1)
^
BAS release switch (A7/7s1) and
^
stop lamp switch (S9/1).
If a fault is detected, the system switches off. This is indicated to the driver by switching on the indicator lamp:
^
BAS, BAS/ETS, BAS/ASR or BAS/ESP indicator lamp (A1 e39, e49, e48 or e47).
^
In models 203, 209, 215, 220 via the multifunction display (A1p13).
In addition, a fault code is stored in the control unit.
The safety circuit also constantly monitors the battery voltage. If the voltage falls below 10 V or exceeds 16-18 V, the system is also switched off until
the voltage returns to the specified range.
GF42.31-P-4500A BAS Control Unit, Location/Task/Function
GF42.31-P-4500A BAS control unit, location/task/function