C 43 AMG (202.033) V8-4.3L (113.944) (1998)
Component Identification
8
Tighten spindle (7) until a firm resistance is felt.
While turning the spindle (7) ensure that the pins of the riveted link are inserted into the holes of the outer plate.
9
Remove rivet press tool (2).
Component Identification
10
Turn over moving assembly insert (4) with the digit D5 to the riveting section (arrow).
Component Identification
11
Position riveting tool (2) exactly above the middle of the pins (arrow).
12
Tighten spindle (7) fully at riveting tool (2).
Tightening torque of spindle: Reference value approx. 30 to 35 Nm.
13
Rivet pins of the riveted link individually.