C 43 AMG (202.033) V8-4.3L (113.944) (1998)
Timing Chain Guide: Service and Repair
Remove/Install Slide Rail In Timing Case Cover
Shown On Engine 112
DANGER:
-
Risk of death, Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by
the vehicle manufacturer.
1
Remove engine compartment paneling
2
Remove underride guard
-
Model 463
3
Remove air baffle
-
Model 163 with Engine 113.942
4
Drain and collect engine oil
NOTE: Installation: Replace sealing ring of oil drain plug.
5
Remove cylinder heads. See: Cylinder Head Assembly/Service and Repair/Procedures
6
Remove bottom part of oil pan.
7
Remove timing case cover. See: Timing Cover/Service and Repair/Procedures
8
Remove slide rails (1)
NOTE: At the same time detach slide rails (1) toward front from the retaining bolts.
9
Install in the reverse order.