C 43 AMG (202.033) V8-4.3L (113.944) (1998)
Preparation For Test - Section 22
Preparation for Test:
1. Battery voltage > 11 V,
2. Fuses ok,
3. Disconnect the battery negative cable prior to disconnecting or connecting any of the connectors of the control modules, otherwise fault codes may
be stored in error in the memory.
4. CAN data lines are Ok.
NOTE: For test measuring purposes, the CAN connection to the following control modules must be connected.
PSE control module (A37)
Signal pickup-and activation module (SAM) (N10/1)
Special Tools
Conventional tools, test equipment
Description
Brand, model, etc.
Multimeter 1)
Fluke models 23, 83, 85, 87
1) Available through the MBNA Standard Equipment Program.
Version Coding - Section 31
Version Coding
-
The electronic ignition lock control module (N73) must be version coded