C 43 AMG (202.033) V8-4.3L (113.944) (1998)
/v8-4.3l_(113.944)/Page-2244013.png)
1. Clip tester (1) on to battery.
Once the tester is connected the current measured battery voltage is displayed for approx. 2 s. If a so-called "System noise" is detected by the
tester, check whether all consumers are switched off and wait (for approx. 2 min), until the quiescent current is minimized and the bus systems are
switched off.
2. Follow the menu and select according to the situation:
^
In vehicle (battery connected to on-board electrical system)
^
Not in vehicle (battery disconnected from on-board electrical system)
Confirm selection with "Enter".
3. Follow the menu and select according to the situation:
^
12 - 114 AH (battery capacity 12 - 114 Ah)
^
115 AH > (battery capacity >= 115 Ah)
Confirm selection with "Enter".
