C 43 AMG (202.033) V8-4.3L (113.944) (1998)
Rear Cross-Member: Testing and Inspection
Position of Center Assembly (Differential) In Axle Suspension
NOTE: Numbers in parentheses ( ) indicate a component or tool in the associated illustration.
Using the test fixture tool No. 210 589 02 43 00 (01), or equivalent, of the removal and installation tool (09, 015), check and correct installed position of
center assembly in rear axle carrier (1).
-
Mount test fixture (01) with the spacers part 09 and thrust pieces part 15 on both sides with the existing threaded spindles and nuts and tighten
slightly (09, 01 5).
-
Pull in both rubber mounts (62) evenly into the rear axle carrier until the pin (arrow) of the test fixture (01) is located centrally in the bore of the
cross member