C 55 AMG (203.076) V8-5.5L (113.988) (2006)
Adjustment Measuring Position "A" (x) - 140 m.m
Front: Lower Than Outer Roof Surface - 0 to 1 m.m
Rear: Higher Than Outer Roof Surface - 0 to 1 m.m
10
Tighten torx screws (5)
Screw Of Sliding/tilting Roof Panel To Bracket Of Tilt Angle - 4 N.m
NOTE: Tighten the rear screw on each side first and then the front screw. When tightening the rear screws, apply pressure to the rear and slightly
downward with the screwdriver (arrows).
11
Synchronize sliding/tilting roof
NOTE: To synchronize move sliding/pop-up roof to pop-up position and hold switch down for 1s.
12
Check sliding/pop-up roof for proper function and fit
13
Install in the reverse order
Special Tools
Special Tools