C 55 AMG (203.076) V8-5.5L (113.988) (2006)
Oil Filter Housing: Service and Repair
Remove/Install Oil Filter Housing
Shown On Engine 112 Without Air Pump
Remove/Install
DANGER:
-
Risk of death, Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by
the vehicle manufacturer.
1
Unclip cover at face end of engine
-
Model 211, 220, 230.475
2.1 Remove engine trim panel or air cleaner
-
Except model 170.466, 203.065/265, 211.061/065/070, 230.475.
NOTE: Detach engine cover or air cleaner by lifting vertically up and off the cylinder head covers.
2.2 Remove air cleaner housing
3.1 Remove fan shroud (2) with electric fan (1)
-
Except Model 211.061/065/070
3.2 Remove electric fan (1)
NOTE: On model 163 unscrew bolts at bottom of fan shroud (2).
4
Unscrew oil filter housing cover (4)
5
Unscrew bolts of oil-water heat exchanger (9) at oil filter housing (5)
NOTE: Do not pinch off coolant lines.
6
Unscrew bolt of oil filter housing (8)
7
Remove oil filter housing (5)
NOTE: Installation: Replace sealing ring of oil filter housing (6).
8
Install in the reverse order
Inspect