CL 500 (215.375) V8-5.0L (113.960) (2000)
/v8-5.0l_(113.960)/Page-2085001.png)
Brake Rotor/Disc: Procedures
Clean perforations in brake disk
The perforated brake disk (61 ) can clog due to brake abrasion. For this reason the disk should be cleaned.
1. Clear brake dust from holes in brake disk (61 ) using a suitable drift.
If the holes in the brake disk (61 ) cannot be cleaned with a suitable drift, drill it out with a 4.3 mm dia. drill bit.
The perforations in the brake disk (61 ) must not be made larger by drilling. (Do not cut shavings off the brake disk.)
