CL 500 (215.375) V8-5.0L (113.960) (2000)
/v8-5.0l_(113.960)/Page-790001.png)
Connecting Rod: Service and Repair
AR03.10-P-6111-02BV Tightening Conrod Bolts
Tightening conrod bolts
Shown on engine 112
1. Lubricate thread and bolt head contact surface of conrod bolts with engine oil.
2. Screw in conrod bolts and tighten to step.
3. Tighten conrod bolts to step.
4. Tighten conrod bolts using an angle wrench to step.
If no torquing angle wrench is available, the conrod screws can be torqued further by the specified angle in a single operation using a wrench and
tommy bar. Do not use a flexi-rod torque wrench for tightening in order to avoid any angle errors.
