CL 500 (215.375) V8-5.0L (113.960) (2000)
/v8-5.0l_(113.960)/Page-802004.png)
Component Identification
5
The thrust plates (8) are assigned to the bearing caps (6) using the numbers "1" and "0" (see table). These are engraved on the journal of the
crankshaft (arrowed).
The thrust plates (8) installed must have the same designation.
Assignment of thrust washers to crankshaft M 112, 113
Component Identification
6
Insert crankshaft (15) into crankcase
7
Install top thrust plates (8).
The oil grooves (9) of the thrust plates (8) must point toward the crank webs (10).
