CL 500 (215.375) V8-5.0L (113.960) (2000)
/v8-5.0l_(113.960)/Page-806001.png)
Crankshaft Seal Retainer: Procedures
AH01.40-P-1000-06A Notes application of sealant to end cover with radial shaft seal
Application of sealant to end cover
Application of sealant to end cover
The lines drawn G, E and the arrow D mark the application of sealant.
Clean sealing surfaces, apply sealant only to the specified surfaces with a bead of 2.0 mm ± 0.5 mm.
The sealant must be applied within 10 minutes!
The silicone bead must not be spread. Only the silicone sealant listed in Repair products may be used.
