CL 500 (215.375) V8-5.0L (113.960) (2000)
/v8-5.0l_(113.960)/Page-2706006.png)
Note:
^
The fuse holder (35) and fuse can be discarded.
^
r/y designates red/yellow wire.
6.
Install unpinned wire connector (with r/y wire, Figure 5) into new harness connector (A):
^
Insert the unpinned wire connector (with r/y wire, Figure 5) into position 1 of the new harness connector (A).
^
Secure wire connector (with r/y wire) into position by locking closed the harness connector cover (arrow).
7.
Connect the new harness connector (arrow, Figure 6) to the harness connector on the new blower motor harness wire (1) and place coupled
connector (X64/1) below right front SAM in the right fuse box (F1/1).
