CL 500 (215.375) V8-5.0L (113.960) (2000)
Low Tire Pressure Indicator: Procedures
GF40.15-P-0001-02B Tire Pressure Monitor (TPM), Activation
If the tire pressure is changed by the driver, or if a wheel is replaced or a tire is changed, the set air pressure values must be stored in the TPM control
unit (N88) as nominal monitoring values.
Proceed as follows:
-
Engine OFF!
-
Correct the air pressure at each wheel.
-
Switch on ignition.
-
Press the TPM activation push-button (S107).
-
This system message appears in the multifunction display (A1 p13).This message disappears next time the engine is started.