CL 500 (215.375) V8-5.0L (113.960) (2000)
Drive Belt: Service and Repair
Remove/install Poly V-belt
Shown On Engine 112
Remove
1.1 Remove fan shroud (2) with electric fan (1)
2
Loosen and remove the poly-V-belt (3)
NOTE: For this step, swivel stud bolt (4) at tensioning pulley (5) in anti-clockwise direction Lock tensioning pulley with drift or pin (5 mm
diameter).
External Torx set: See "Special Tools" given below.
Inspect
3
Inspect belt pulley sections and tensioning device for damage and dirt
4
Inspect the poly-V-belt (3)
Install
5
Mount the poly-V-belt (3), then tighten, for mounting reference please refer to Diagrams/ Mechanical See: Diagrams.
NOTE:
-
Do not use belt wax or any similar products.
-
Start at tensioning pulley in the numbered sequence of the respective running diagram: Running diagram of poly V-belt
6
Install fan shroud (2) together with electric fan
Special Tools
External Torx Set, P/N # 001 589 76 09 00