CL 500 (215.375) V8-5.0L (113.960) (2000)
/v8-5.0l_(113.960)/Page-2299001.png)
Fuse and Relay Boxes: All Technical Service Bulletins
Lighting - 'Check Left Low Beam' Message Displayed
Date: February 24, 2003
Order No.: P-B-54.21/67/a
Supersedes: P-B-54.21/67 dated July 31, 2002
Group: 54
Revision: Warranty Information updated
SUBJECT:
Model 220 as of A137742 with Xenon Headlamp Unit Model 215 as of A007961 with Bi-Xenon Headlamp Unit
Warning Message In Instrument Cluster "Check Left Low Beam Lamp"
If you encounter instances in the above models where a warning message in the instrument cluster's multi-function display indicates "Check Left Low
Beam Lamp", perform the following procedure.
1.
Using Star Diagnosis perform a Short Test.
2.
Once completed, select the right front SAM module and read the stored fault codes.
3.
If code B1630 is present, select Control Unit Version and record the part number and software status.
4.
Replace the SAM module if a different part number than 031 545 17 32 or a software status older than 20/01 is displayed.
Note:
If code B1630 is present and the low beam is operational and the vehicle is equipped with SAM module part number 031 545 17 32 or a newer
version, do not replace or attempt other repair. Additional information will be provided as soon as possible.
Parts Information
In Case of Warranty
