CL 500 (215.375) V8-5.0L (113.960) (2000)
Voice Activation Module: Service and Repair
AR82.70-P-0003I Remove/Install Voice Control System Control Unit
Removing and installing voice control system control module
Shown On Model 220
1
Connect quiescent current retention unit
-
See "Commercially Available Tools" below.
2
Disconnect ground cable of battery
3.1 Remove rear seat cushion
3.2 Remove bucket seat
-
Model 220 with code 401, right side only.
4
Remove seat adjustment device on rear sea
-
Model 220 with code 401, right side only.
5
Unscrew screws (1) and nuts (2) and remove assembly plate (3) from vehicle floor
6
Disconnect connector (4) from voice control system control module (A35/11)
7
Disconnect D2B connection (5) from voice control system control module (A35/11)
CAUTION: Do not bend D2B wires.
NOTE: If the voice control system control module (A35/11) should be removed for a longer period of time, install adapter for closing the D2B
ring.
8
Unscrew screws (6)
9
Install in the reverse order.
Commercially Available Tools
Commercially Available Tools