CL 500 (215.375) V8-5.0L (113.960) (2000)
/v8-5.0l_(113.960)/Page-2194001.png)
Ignition Switch: All Technical Service Bulletins
Electrical - Multiple Malfunctions After EIS Replacement
Date: September 8, 2004
Order No.: P-B-80.57/27
Supersedes:
Group: 80
SUBJECT:
Model 215.375/378
Model 220.170/175/178
Model Year 2000 and 2001
After EIS Replacement Circuit 15x Delayed After Ignition Start
If you receive customer reports in the above model vehicles of electrical anomalies such as inoperative steering wheel adjustment, inoperative air
conditioning I heater, and the loss of the outside temperature display within the instrument cluster for approximately 50 seconds after vehicle start-up,
following the replacement of an EIS (Electronic Ignition Switch), perform the following remedy to repair.
1)
Using STAR Diagnosis enter the following menu: Control Units --> Body --> EIS --> Control Unit Adaptation --> Read Coding and Change if
Necessary
2)
Enter menu item for "Turn signal confirmation for opening and closing via transmitter key" and set coding to "ON". Carry out transferring coding
to control unit.
3)
Enter menu item for Adaptation of electronic ignition switch to vehicle model" and set Vehicle Model coding to "W2201215 before modification
Year 01/1". Carry out transferring coding to control unit.
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair.
In Case of Warranty
