CL 500 (215.375) V8-5.0L (113.960) (2000)
Shown On Model 220
DANGER:
-
Risk of death. Death may result if vehicle slips or topples from the lifting platform
-
Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by
the vehicle manufacturer
1
Remove front wheels
2
Remove track rod
3
Remove bellows
4
Counter gear rack (arrow)
NOTE: Using open-end wrench 27 mm
5
Remove track rod with ball pint (12)
CAUTION: Do not use force (hammer blows, excessive leverage)
6
Install in the reverse order