CL 500 (215.375) V8-5.0L (113.960) (2000)
Single PVC tube covering both wires (arrow, Figure 2) at the electrical connector (12, Figure 3) shown.
Heated washer hoses which do not require replacement are identified as follows:
1.
Part number 220 860 05 92
Or
2.
Part number 220 860 08 92 with two separate wire covering tubes per heater wire.
If a faulty heated washer hose is found, please follow the procedure, for the replacing the faulty heated washer hose.
NOTE:
Prior to performing this procedure, please review entire contents of this bulletin.
1.
Remove ignition key from ignition lock.
2.
Open engine hood and raise to vertical position.