CL 550 (216.371) V8-5.5L (273.961) (2008)
/v8-5.5l_(273.961)/Page-3338002.png)
of rear mud guards (2)
Do not remove protective foil on adhesive strips completely.
4. Position rear mud guard (2) on rear bumper as shown in picture; observe position of lug (arrow) in bead on rear bumper.
5. Install removed expansion rivet (3) on rear bumper.
6. Position rear mud guard (2) on rear bumper as shown in picture; observe position of lug (arrow) in bead on rear bumper.
7. Install retaining clips (4).
A barb is present on the retaining clips (4) for the rear mud guards (2) on both sides.
8. Make dia. 6.5 mm passage in wheel well paneling with punch at position indicated by rear mud guard (2).
9. Install supplied expansion rivet (5) on wheel well paneling.
10. Secure expansion rivet (5) with tooth lock washer (6).
11. Remove entire protective foil (arrows) from adhesive strips on rear mud guards (2) and uniformly press adhesive strips against rear bumper (2)
