CL 550 (216.371) V8-5.5L (273.961) (2008)
Component Identification
Departure time programming
The departure time is configured and activated in the COMAND controller unit with the aid of the central operating unit. The departure time menu is
called up in the COMAND controller unit via the central operating unit at circuit 15R On and the departure time is then entered. This is shown in the
COMAND display. Up to 3 departure times can be stored. Following selection, the departure time must then also be activated. Activation is indicated by
the yellow indicator lamp in the STH button. The selected departure time is stored in the instrument cluster.
Model 216 and model 221 as of 1.6.06:
The departure time can also be activated or changed using the stationary heater transmitter. On model 221, the telephone antenna receives the signal and
forwards it to the antenna splitter on the stationary heater receiver.