CL 550 (216.371) V8-5.5L (273.961) (2008)
-
Press button DOWN
The following message appears in the multifunction display:
Use Current
Pressures As New Reference Values
Press 'OK' to Confirm
-
Press button 'OK'
The following message appears in the multifunction display:
Tire Pressure Monitor
Reactivated
After driving a few minutes the system verifies that the current tire inflation pressures are within the system's specified range. Afterwards the current tire
inflation pressures are accepted as reference values and then monitored.
-
If you wish to cancel: Press button BACK
or
-
Press button UP to exit the menu screen
When the wheel positions have been changed, the air pressure of a tire may be displayed for the wrong position temporarily After driving for a few
minutes, the air pressure will be shown for the correct position
With a spare wheel mounted, the system may still indicate the tire inflation pressure of the removed road wheel for some minutes If this happens keep
in mind that the indicated value where the spare wheel is mounted does not reflect the actual spare tire inflation pressure