CL 550 (216.371) V8-5.5L (273.961) (2008)
Seat Occupant Classification Module - Air Bag: Description and Operation
GF91.60-P-4046SCU WSS (Weight Sensing System) Control Unit, Component Description
- with CODE (494) USA version
Component Identification
Location
The WSS control unit is located at the seat frame of the front passenger seat.
Task
^
Power supply and evaluation of the seat occupied recognition pressure sensor (B48/4)
^
Power supply and evaluation of the belt tension sensor (B48/3)
^
Calculation of classification of weight on front passenger seat
^
Provision of weight classification via the interior CAN
^
Self-test of WSS control unit, seat occupied recognition pressure sensor and belt tension sensor
^
Storage of detected faults
The WSS control unit evaluates the data from the seat occupied recognition pressure sensor and the belt tension sensor. The measurements are used to
assign a weight classification to the weight on the seat, which is then sent to the restraint systems control unit (N2/7) via the interior CAN and the chassis
CAN for precise control of the front passenger airbag unit.
Discrete inputs
^
Circuit 30
^
Circuit 31
^
Seat occupied recognition pressure sensor data
^
Data of the belt tension sensor
Discrete outputs
^
Seat occupied recognition pressure sensor power supply
^
Belt tension sensor power supply
CAN signals
The WSS control unit is an interior CAN subscriber.