CL 550 (216.371) V8-5.5L (273.961) (2008)
2
Measure distance dimension (V2) from check point (K) to center of Torx(R) bolt head of front mount of front axle carrier. Measure on the left and
right side in each case.
If necessary, unscrew and screw in Torx(R) bolts and check for deformation.
Shown on model 221
Component Identification
3
Measure distance dimension (V3) diagonally to the centering point of the Torx(R) bolt heads between the front and rear bearing of the front axle
carrier. Measure on the left and right side in each case.
Shown on model 221
Component Identification
4
Measure distance dimension (V4) from the centering point of the Torx(R) bolt heads between the front bearings of the front axle carrier.
Shown on model 221