CL 550 4MATIC (216.386) V8-5.5L (273.961) (2009)
/v8-5.5l_(273.961)/Page-1453001.png)
Rear Bumper: Procedures
AZ88.00-P-0001-03SC Converting Rear Bumper
Check components removed from standard bumper before assembly and replace if damaged.
Pay attention to paint damage.
1. Insert bottom section paneling (2) into rear bumper paneling (1) and arrest.
2. Check whether bottom section paneling (2) is arrested correctly on inside of rear bumper paneling (1), if necessary press in again (see arrows).
3. Insert rear reinforcement (3) on left and right into rear bumper paneling (1) and fasten with five holddown clips (4) each.
