CL 550 4MATIC (216.386) V8-5.5L (273.961) (2009)
/v8-5.5l_(273.961)/Page-1496005.png)
14
Route branch-off line for connection of right illuminated door sill molding of illuminated door sill moldings wiring harness (10) to door cutout and
fix in place using adhesive felt tape.
Do not damage illuminated door sill moldings wiring harness (10) by squeezing or pinching it.
15
Route branch-off line for left side of illuminated door sill moldings wiring harness (10) to left side of vehicle and fix in place using cable ties or
adhesive felt tape.
Do not damage illuminated door sill moldings wiring harness (10) by squeezing or pinching it.
16
Route branch-off line for left side of illuminated door sill moldings wiring harness (10) along on-board wiring harnesses and connect to converter
(13) using the black, 8-pin plug.
For each door sill molding, one converter is installed.
17
Glue felt to converter (13) and slide converter (13) into cable duct (12).
18
Route branch-off line for connection of left illuminated door sill molding of illuminated door sill moldings wiring harness (10) to door cutout and
fix in place using adhesive felt tape.
