CL 550 4MATIC (216.386) V8-5.5L (273.961) (2009)
-
Signals from rear control unit (N22/6) (model 216 only)
-
Signals from left rear door control unit (N69/3) (model 221 only)
-
Signals from right rear door control unit (N69/4) (model 221 only)
Evaluation of input factors
The read in input factors are evaluated by the pneumatic pump for dynamic seat control. Actuation of the electric motor in the pneumatic pump for
dynamic seat control occurs accordingly.
Actuation of components
The actuation of the components takes place via the following connections:
^
Direct internal line
Direct internal line
-
Actuation of the solenoid valve to expel compression moisture in the composite pressure vessel
No components are actuated via the CAN bus by the pneumatic pump for dynamic seat control. Only information on further processing steps for other
control units is sent to the interior CAN.
Variants
-
None