CL 550 4MATIC (216.386) V8-5.5L (273.961) (2009)
/v8-5.5l_(273.961)/Page-1148002.png)
Component Identification
Pressing in
4
Rotate strut rod (2) and align hydro-mount (1) on chamfered side (chamfer 2 mm x 45 degrees ) of strut rod (2).
Component Identification
Align hydro-mount (1) such that the lug (3) is at a 90 degrees angle piece to the imagined reference line A:
Model 204.9, 221.08/18, 216.38: Lug (3) must face towards hitch ball thread (7) (picture A).
Model 204.08/28: Lug (3) must face in opposite direction to the hitch ball thread (7) (picture B).
Component Identification
