CL 550 4MATIC (216.386) V8-5.5L (273.961) (2009)
Differential Mount: Service and Repair
AR35.10-P-0050-02SX Remove, Install Rear Rubber Mount of Rear Axle Center Assembly
Suspension
AR35.10-P-0050-02SX Remove, install rear rubber mount of rear axle center assembly suspension
Special Tools
Component Identification
Removing
1
Mount hollow piston cylinder (07) using hydraulic hose (023) to hand pump (021).
2
Mount extraction and insertion tool using hollow piston cylinder (07) to rear axle carrier (5) and rubber mount (10).
3
Press rubber mounts (10) forward out of rear axle carrier (5). When turning the spindle (03) into the thrust piece (01), make sure that the spare tire
well is not damaged. If the hollow piston cylinder (07) has reached its max. stroke, release pressure at the hand pump (021), turn the spindle (03)
further into the thrust piece (01) and repeat the pressing procedure.