CL 550 4MATIC (216.386) V8-5.5L (273.961) (2009)
/v8-5.5l_(273.961)/Page-821003.png)
6
Apply extraction and insertion tool using hollow piston cylinder (07) to rubber mount (10).
7
Press rubber mount (10) into rear axle carrier (5).
When turning the spindle (03) into the stop (06), make sure that the spare tire well is not damaged.
If the hollow piston cylinder (07) has reached its max. stroke, release pressure at the hand pump (021), turn the spindle (03) further into the stop
(06) and repeat the pressing procedure.
The shape of the stop (06) determines the end position of the rubber mount (10) in the rear axle carrier (5).
