CL 550 4MATIC (216.386) V8-5.5L (273.961) (2009)
/v8-5.5l_(273.961)/Page-847013.png)
Component Identification
1
Support transmission with transmission jack and transmission platform.
2
Detach rear engine crossmember (34).
3
Depending on the correction insert the shop-made shims between the rear engine crossmember (34) and frame floor or between the rear engine
mount and the rear engine crossmember (34).
The dimension for the shims must be taken from the corresponding part; see the pictures below.
4
Mount rear engine crossmember (34)
5
Remove transmission jack and transmission platform.
Shown on model 211 with engine 112
Example:
Component Identification
Shop-made shims (a) for installing between the rear engine crossmember (34) and frame floor assembly.
Material: steel or aluminum
Example:
