CL 55 AMG (215.373) V8-5.5L (113.982) (2001)
Pneumatic System: Service and Repair
AR80.20-P-2700M Remove/Install PSE Control Module (A37/2-A37/5)
Illustrated On Model 220
1
Remove paneling in trunk
NOTE: except right side paneling and rear wall paneling
2
Press apart plastic lugs (arrows) and remove foam cap (1)
3
Unclip pneumatic strips (2, 3) on pneumatic control module with PSE control module (combined) (A37)
NOTE: Clips are located in the oblong holes marked with arrows. Unclip with flat tool, e.g. screwdriver
4
Loosen electrical connector (4) on PSE control module (combined) (A37) and remove lead
NOTE: Turn in direction of arrow
5
Remove PSE control module (combined) (A37)
6
Install in opposite order
NOTE: If the PSE is replaced version coding must be accomplished via STAR DIAGNOSIS
7
Check central locking, lumbar support or multicontour backrest, power locking, head restraint extension and retraction for proper function.