mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Procedures|Page 13473 > < Diagram Information and Instructions|Page 13467
Page 1
background image

Low Tire Pressure Indicator: Procedures

GF40.15-P-0001-02C Tire Pressure monitor (TPM), activation

If the tire pressure is changed by the driver, or if a wheel is replaced or a tire is changed, the set air pressure values must be stored in the TPM control
unit (N88) as nominal monitoring values.

Proceed as follows:
-

Engine OFF!

-

Correct the air pressure at each wheel.

-

Switch on ignition.

-

Use the system select push-button (S11 0s3) to select the tire pressure monitor system.

Procedures|Page 13473 > < Diagram Information and Instructions|Page 13467