CL 600 (140.076) V12-6.0L (120.982) (1998)
Arresting lever (arrow) on rear seat cushion (1)
press in outward direction, lift rear seat cushion at front and remove. Observe installation note!
Screw (arrow) on rear backrest (2) at bottom
screw out (10 mm).
Rear backrest (2)
slide up and remove, when installing hook rear backrest into sheet metal tabs (arrows) at top and position rear seat belt.
Reinstall
in opposite order
Arrows = mounting points for rear seat cushion
Arrows = mounting points for rear backrest
Installation note
When reinstalling rear seat cushion always ensure that sheet metal tab (arrow) on rear floor engages in cutout in cushion shell.