CL 600 (140.076) V12-6.0L (120.982) (1998)
Thermostat: Service and Repair
OVERVIEW
Coolant:
Drain from radiator (20-4200).
Fan shroud ring:
Take off, place over fan, fit on.
The 4 catch studs of the fan shroud ring:
Ensure correctly located in the fan shroud when installing.
Coolant hoses (1 and 2):
Take off, fit on.
Coolant thermostat housing cover (3):
Take off, fit on (9 Nm).
Coolant thermostat housing cover (3):
Swivel forward by 90°.
Temperature sensors (4 and 5):
Unscrew, screw on.
Installation Note
Seals (4a and 5a):
Replace according to condition.
Holder (6):
Unscrew, screw on (21 Nm).
Coolant thermostat housing cover (3):
Remove, install.
Coolant thermostat (7):
Remove from coolant thermostat housing cover (3), install.
Installation Note
The profile plate (7a):
For the coolant thermostat must catch in the recesses (3a) on the coolant thermostat housing cover (3).