CL 600 (140.076) V12-6.0L (120.982) (1998)
/v12-6.0l_(120.982)/Page-636005.png)
23
Fit protective cap (86a) (contained in parts kit) onto the valve stem and oil thoroughly
24
Push new valve stem seal (86) into assembly drift (2) and press onto the valve stem as far as a stop.
if assembly drift 119 589 00 43 00 1st version is used, widen its inner 0 to 7.5 mm.
24
Takeoff protective cap (86a).
Assembly drift (2) 104 589 01 43 00 (8mm exhaust valve)
Assembly drift (2) 119 589 00 43 00 (7 mm inlet, exhaust valve)
SPECIAL TOOL
