CL 600 (140.076) V12-6.0L (120.982) (1998)
013
Impulse counter scan tool
075
Adaptor for impulse counter scan tool
087
Hand-Held Tester (HHT)
094
Multiplexer, 965 589 00 40
X11/4 Data link connector
Connecting Impulse Counter Scan Tool:
Connect adaptor (075) to X11/4 and connect impulse counter scan tool to the adaptor as follows:
Red wire (circuit 30, voltage) .......................................................................................................................................................................... Socket 3
Black wire (circuit 31, ground) ....................................................................................................................................................................... Socket 1
Yellow wire .................................................................................................................................................................................................. Socket 8
NOTE: DTC's which have been stored due to testing or disconnecting of lines must be erased from the DTC memory at the end of testing.